国内精品久久久91性色-亚洲一区二区精品动漫-国产粉嫩精品一二三区-亚洲精品国产欧美在线

 歡迎訪問濟南科爾超聲波設備有限公司網站!

專注生產工業用超聲波清洗機

讓工業清洗無難事

電話

業務咨詢電話:

18663767799

你所在位置: 首頁-新聞動態-常見問題全自動物料箱清洗機的清洗工作
常見問題

全自動物料箱清洗機的清洗工作

作者:admin來源:http://hn-qzj.com/時間:2022-08-11

全自動物料箱清洗機在使用過程中需要對其進行正確的操作,正確的操作是機器延長使用壽命的根本保證。下面山東超聲波清洗機廠家就來為您講一講吧。
The full-automatic material box cleaning machine needs to be operated correctly in the process of use. Correct operation is the fundamental guarantee for prolonging the service life of the machine. Next, Shandong ultrasonic cleaning machine manufacturer will tell you about it.
1、打開總電源,檢查放水閥是否關閉,設置熱水溫度。
1. Turn on the main power supply, check whether the drain valve is closed and set the hot water temperature.
2、打開進水管閥門,當水灌滿儲水池后,電磁閥自動關閉停止供水。
2. Open the valve of the water inlet pipe. When the water tank is filled with water, the solenoid valve will automatically close to stop water supply.
3、儲水池水灌滿后,打開蒸汽管道閥門,當溫度達到設定值時,電磁閥自動關閉停止蒸汽供應。
3. After the water storage tank is full, open the steam pipe valve. When the temperature reaches the set value, the solenoid valve will automatically close to stop the steam supply.
山東超聲波清洗機
4、水灌滿后,先按“RESET”按鈕,再按“START”按鈕,啟動設備。
4. After the water is full, press the "reset" button first and then the "start" button to start the equipment.
5、灌滿水之前,禁止啟動水泵,生產過程中經常清洗過濾板,以免水壓低于4bar,損壞水泵。
5. Before filling with water, it is forbidden to start the water pump. During the production process, the filter plate is often cleaned to avoid damage to the water pump when the water pressure is lower than 4 bar.
6、生產中出現卡盒現象時應及時停車,待故障排除后方可繼續進行。
6. In case of jam in production, stop the machine in time, and continue the operation after the fault is eliminated.
7、生產結束后,停止輸送機及水泵開關,關閉蒸汽閥,供水閥。
7. After production, stop the switch of conveyor and water pump, close the steam valve and water supply valve.
8、打開排水閥門進行排水并進行清洗、消毒。
8. Open the drain valve to drain, clean and disinfect.
全自動物料箱清洗機的清洗工作及操作規程小編就為大家介紹到這里,如需了解更多信息,歡迎關注我們網站hn-qzj.com吧,聯系我們了解更多。
The cleaning work and operating procedures of the automatic material box cleaning machine are introduced here. If you need more information, please follow our website hn-qzj.com and contact us to learn more.